Code
|
Option Name
|
Meaning
|
26
|
MTU option
|
Specifies the MTU discovery size for this interface. The minimum MTU value is 68.
|
27
|
All subnets are local
|
Specifies whether the client assumes that all subnets of the client's internetwork use the same MTU as the local subnet where the client is connected. 1 indicates that all subnets share the same MTU; 0 indicates that the client should assume some subnets may have smaller MTUs.
|
28
|
Broadcast address
|
Specifies the broadcast address used on the client's subnet.
|
29
|
Perform mask discovery
|
Specifies whether the client should use Internet Control Message Protocol (ICMP) for subnet mask discovery. 1 indicates that the client should perform mask discovery; 0 indicates that the client should not.
|
30
|
Mask supplier
|
Specifies whether the client should respond to subnet mask requests using ICMP. 1 indicates that the client should respond; 0 indicates that the client should not.
|
31
|
Perform router discovery
|
Specifies whether the client should solicit routers using the router discovery method in RFC 1256. 1 indicates that the client should perform router discovery; 0 indicates that the client should not.
|
32
|
Router solicitation address
|
Specifies the IP address to which the client submits router solicitation requests.
|
33
|
Static route
|
Specifies a list of IP address pairs that indicate the static routes the client should install in its routing cache. Any multiple routes to the same destination are listed in descending order or priority. The routes are destination/router address pairs. (The default route of 0.0.0.0 cannot be used as a destination for a static route.)
|