• Abstract — PPTP (Point-to-Point Tunneling Protocol) is a network protocol used in the implementation of Virtual Private Networks
  • Simulations were performed with an average file packet delivery scenario of 500 MB. Graphical Network Simulator-3 (GNS3) is a
  • Paper Title (use style: paper title)




    Download 91.12 Kb.
    bet1/3
    Sana30.03.2024
    Hajmi91.12 Kb.
    #182134
      1   2   3
    Bog'liq
    2 5373198383026540433, 2- Laboratoriya ABN, KIRISH TARJIMA, apteka, test, amaliy 5 dvx, asatova



    Atlantis Highlights in Engineering (AHE), volume 1
    International Conference on Science and Technology (ICST 2018)
    Point to Point Protocol Tunneling VPN Simulation and Analysis on Sniffing

    Chrystia Aji Putra1, Yisti Vita Via2, Wahyu SJ Saputra3


    Informatics Engineering
    Universitas Pembangunan Nasional “Veteran” Jawa Timur Surabaya, Indonesia
    1ajiputra@upnjatim.ac.id, 2yistivia.if@upnjatim.ac.id





    Abstract PPTP (Point-to-Point Tunneling Protocol) is a network protocol used in the implementation of Virtual Private Networks (VPN). PPTP uses a client-server design that operates at Layer 2 of the OSI model. Network administrators require the existence of performance testing Point to point protocol and VPN network topology; this can be done with the result of simulation of computer networks. This research will discuss about the level of performance and security of PPTP to sniffing in VPN network. Simulations were performed with an average file packet delivery scenario of 500 MB. Graphical Network Simulator-3 (GNS3) is a network software emulator. This allows a combination of virtual and real devices, used to simulate complex networks. The simulation will be done using a VPN network and not using VPN by using GNS3 network simulation tool. Measurement of performance and security analysis is obtained by using Wireshark. The simulation results of the test will produce data to be used in the analysis process. PPTP performance analysis is performed in testing data transfer using FTP protocol when using the VPN network and not using VPN network. Performance parameters measured using Wireshark include throughput and delay. Testing is done by transferring data from the FTP protocol using a VPN network and not using a VPN network. The data transfer test results will get the parameters of output, delay, and data level of confidentiality. The best throughput values give results, data transfers that not use VPN are higher than using a VPN with an average yield of 153 KB and a delay in the network that does not use a VPN that is 0.0032 MS. Data transmission process from both methods shows the security of the FTP protocol, this concludes the security of the PPTP VPN protocol.



    Download 91.12 Kb.
      1   2   3




    Download 91.12 Kb.

    Bosh sahifa
    Aloqalar

        Bosh sahifa



    Paper Title (use style: paper title)

    Download 91.12 Kb.