This section lists the counters that are relevant to managing network performance. Most of the counters are straightforward. We provide guidelines for the counters that typically require explanation.
IPv4
Datagrams received per second.
Datagrams sent per second.
IPv6
Datagrams received per second.
Datagrams sent per second.
Network Interface > [adapter name]
Bytes received per second.
Bytes sent per second.
Packets received per second.
Packets sent per second.
Output queue length.
This counter is the length of the output packet queue (in packets). If this is longer than 2, delays occur. You should find the bottleneck and eliminate it if you can. Because NDIS queues the requests, this length should always be 0.
Packets received errors.
This counter is the number of incoming packets that contain errors that prevent them from being deliverable to a higher-layer protocol. A zero value does not guarantee that there are no receive errors. The value is polled from the network driver, and it can be inaccurate.
Packets outgoing errors.
Processor Information
Percent of processor time.
Interrupts per second.
DPCs queued per second.
This counter is an average rate at which DPCs were added to the processor's DPC queue. Each processor has its own DPC queue. This counter measures the rate at which DPCs are added to the queue, not the number of DPCs in the queue. It displays the difference between the values that were observed in the last two samples, divided by the duration of the sample interval.
TCPv4
Connection failures.
Segments sent per second.
Segments received per second.
Segments retransmitted per second.
TCPv6
Connection failures.
Segments sent per second.
Segments received per second.
Segments retransmitted per second.
| 