|
Windows XP/Windows Whistler Server/Windows 2000
|
| bet | 65/250 | | Sana | 21.03.2017 | | Hajmi | 1,03 Mb. | | #428 |
Windows XP/Windows Whistler Server/Windows 2000: Support BIOS update, security such as pre-boot password, and SMBIOS 2.3 static table data. [BIOS-0005,0006, 0008, 0009; SDG3:12]
Support console redirection of serial port or Debug Port Specification and FAQ A1.5.16. [BIOS–0010; SDG3:13.4, SDG3:15]
x86-based: Support Int13h Extensions on BIOS boot-based system for correct support of high-capacity hard drives. [BIOS-0011; SDG3:147]
x86-based client: Configure each PCI boot device IRQ to a PCI-based IRQ and write the IRQ into the interrupt line register 3Ch. [BIOS-0017]
Provide PCI interrupt routing information using a _PRT object per ACPI 1.0b Section 6.2.3 for x86-based systems or ACPI 2.0 Section 6.2.8 for Itanium-based systems. [PCI-0127; SDG3:46]
x86-based: Support logical block addressing (LBA) for ATA disks (if present in the system). [ATA-0117; SDG3:147]
Provide boot support for USB keyboards and hubs. [BIOS-0005.2; SDG3:13.3 - x86-based servers; SDG3:14.2 - Itanium-based]
For USB host controllers that provide only internally-accessible USB ports and that are not connected to a keyboard or hub: such controllers are not required to provide boot support for keyboards and hubs. If a downstream keyboard is attached to such a host controller, the keyboard and any intermediate hubs must be supported at boot time.
See “Server Note” at A1.4.3 for systems that provide headless server support.
-
Support bootable ATA Packet Interface (ATAPI) devices (if implemented) in compliance with ATAPI Removable Media Device BIOS Specification, Version 1.0 and AT Attachment with Packet Interface – 5 (ATA/ATAPI-5). [BIOS-0018; 0019; SDG3-179]
-
|
| |
