The targets are created in step 2 above.
Create Multi-path I/O for iSCSI Targets (optional)
Multi-path I/O is automatically performed by the storage cluster on the target side. Initiator side MPIO is configured below in the Initiator Configuration Steps.
Configure Security for iSCSI Targets (optional)
Additional security, such as CHAP, can be configured by editing the authentication group for the volume.
-
No additional steps are needed to make the targets ready for use.
-
MPIO for the initiator can be enabled by running the SAN/iQ Solution Pack from the application host.
The SAN/iQ DSM for MPIO is selected, which begins the installation for the MPIO DSM.
When the iSCSI initiator is launched to logon to the LeftHand Networks targets, the default addresses are selected, and MPIO is enabled for all the paths and targets. The “Advanced” tab in the initiator logon process is not needed.
|
