|
// Enable Device for MP operationBog'liq Realtek RF MP Tool Guidelines 1-dars. Axborot tushunchasi (1), Кирисиу. Трикотаж, 2022 г., 8.951-19 G Shokirjon, NORBOYEV QODIRBEK, kaskad, 3 mavzu, 1768-Текст статьи-3614-1-10-20210720, 1-30 falsafa, tarix, 122134, beginner elementary placement test, Rus provaslav cherkovlari, Rus tilida ko`chirma va o`zlashtirma nutq (1), Chiziqli avtomatik boshqarish sistemalarining turg’unligi// Enable Device for MP operation
#iwpriv wlan0 mp_start
// enter MP mode
#iwpriv wlan0 mp_setrfpath 1
//Switch Antenna to WiFi (For Combo IC)
#iwpriv wlan0 mp_channel 1
// set channel to 1 . 2, 3, 4~13 etc.
#iwpriv wlan0 mp_bandwidth 40M=0,shortGI=0
// set 20M mode and long GI,set 40M
is 40M=1 , set 80M= 2.
#iwpriv wlan0 mp_ant_tx a
//Select Antenna A for operation,if
device have 2x2 antennam select antenna "a" or "b" and "ab" for operation.
#iwpriv wlan0 mp_rate 108
// set OFDM data rate to 54Mbps, ex:
CCK 1M = 2, CCK 5.5M = 11 ;OFDM 6M=12、54M = 108; N Rate: MCS0 =
128,MCS1 = 129,MCS 2=130....MCS15 = 143 etc ;VHT Rate :MCS0 = 144,MCS
1=145,MCS 2=146 ~ MCS9 =153.
If you want to get and use Efuse Tx power index,please input advance the command
"iwpriv wlan0 mp_get_txpower ",and use the return value fill to following orange
field.
#iwpriv wlan0 mp_txpower patha=
44
,pathb=
44
//set path A and path B Tx power
level,the Range is 0~63.
#iwpriv wlan0 mp_ctx background
// start continuous Tx
#iwpriv wlan0 mp_ctx stop
//stop continuous Tx
If you want to change the input parameter(rate、channel、txpower、bandwidth),please
must input advance the command "iwpriv wlan0 mp_ctx stop".
#iwpriv wlan0 mp_stop
// exit MP mode
If you want to continue MP test , don’t do this command.
#ifconfig wlan0 down
// close WLAN interface
-------------------------------------------------------------------------------------------------------
|
| |
