|
Note: PWM pin must be kept at low power level when module is in the power on procedureBog'liq SIM800LNote: PWM pin must be kept at low power level when module is in the power on procedure.
SIM800H&SIM800L_Hardware Design_V2.02 48 2015-07-27
Smart Machine Smart Decision
4.14.1. PWM Multiplexing Function
Table 32: PWM multiplexing function
Pin name
Pin number
Mode 0(default)
Mode 1
PWM
26
PWM
GPIO16
Note: Multiplexing function need different software supply.
4.15. Network Status Indication
Table 33: Pin definition of the NETLIGHT
Pin name
Pin number
Description
NETLIGHT
64
Network Status Indication
The NETLIGHT pin can be used to drive a network status indication LED. The status of this pin is listed in
following table:
Table 34: Status of the NETLIGHT pin
Status
SIM800H&SIM800L behavior
Off
SIM800H&SIM800L is not running
64ms On/ 800ms Off
SIM800H&SIM800L not registered the network
64ms On/ 3000ms Off
SIM800H&SIM800L registered to the network
64ms On/ 300ms Off
GPRS communication is established
Reference circuit is recommended in the following figure:
Figure 46: Reference circuit of NETLIGHT
SIM800H&SIM800L_Hardware Design_V2.02 49 2015-07-27
Smart Machine Smart Decision
4.15.1. NETLIGHT Multiplexing Function
Table 35: NETLIGHT multiplexing function
Pin name
Pin number
Mode 0(default)
Mode 1
NETLIGHT
64
NETLIGHT
GPIO17
Note: Multiplexing function need different software supply.
|
| |