|
Connecting UniOP to a PC via Microsoft ActiveSync
|
| bet | 21/23 | | Sana | 21.03.2017 | | Hajmi | 192,5 Kb. | | #918 |
7.1Connection via Serial Line
Connection between a PC and UniOP can be done using Microsoft ActiveSync via serial line using the CA193 cable.
Microsoft ActiveSync V3.5 or higher has to be installed on the PC; the ActiveSync software is downloadable for free from the Microsoft web site at the following link:
http://www.microsoft.com/mobile/pocketpc/downloads/default.asp
The CA193 cable has to be connected to the PC serial port and to the UniOP PC/Printer port
Once the software is installed on the PC, communication via serial line has to be enabled in ActiveSync “Connection Settings” as shown in the following picture:
Figure 1
After confirmation with the OK button, the system will automatically take connection with UniOP; if connection does not start, the service can be started manually on the panel starting the “PC Link” application available under “Start\Programs\Communication”.
ActiveSync will ask for set up a partnership; partnership is only required if Ethernet connection via ActiveSync will be used; next chapter describes how to set up the connection via Ethernet.
The Device Name required for the partnership, can be any free name; this will be used by ActiveSync to identify the Windows CE device in future connections.
If the partnership is defined, the registry on the UniOP must be saved running the “Registry save” program on the unit’s Desktop.
|
| |
