Description:
Used to enter change network driver settings and set-up for serial (Dial-up) connections.
Notes:
In the UniOP platform there are two network drivers that can work simultaneously.
Applet
|
Driver
|
Default Addresses
|
LAN9001
|
SMC LAN91C111 Ethernet 10/100 Mb/s
|
IP 192.168.0.200
Subnet Mask 255.255.255.0
Default Gateway 192.168.0.1
Name Servers (DNS, WINS) not required.
|
SMXETHER1
|
SMUX Ethernet 10 Mb/s
|
IP 192.168.0.201
Subnet Mask 255.255.255.0
Default Gateway 192.168.0.1
WINS 192.168.0.100
|
If DHCP server exist in the LAN it is sufficient to select the check box “Obtain an IP address via DHCP”
If a remote Web server is to be accessed, a proxy server must also be specified in Internet Options (see chapter 3.5.).
One dial-up connection is defined by default: ‘COM1 HW115200’. Its properties may be changed selecting the ‘Configure…’ tab. The default settings are:
baud rate
|
115200
|
parity
|
No
|
stop bit
|
1
|
data bits
|
8
|
flow
|
Hardware
|
New serial (Dial-up) connections can be added from “Make New Connection”.
| 