Add printers in Windows MultiPoint Server 2012
Use the procedures in this topic to make a local printer available to all users on a Windows MultiPoint Server 2012.
 Note
If you are using domain accounts in Windows MultiPoint Server 2012, users can use any network printer from their stations.
 To make a local printer available to all users on a Windows MultiPoint Server 2012 system
1. Connect the printer to the Windows MultiPoint Server 2012 computer.
2. Configure the printer as a shared printer:
a. Log on to the MultiPoint Server computer as an administrator.
b. From the Start screen, open Control Panel.
c. In Control Panel, click Hardware, and then click Devices and Printers.
d. Under Printers and Faxes, right-click the printer, and then click Printer Properties.
e. Click the Sharing tab.
f. Click Share this printer, specify a share name for the printer, and then click OK.
Users logged on to any station that is connected to the Windows MultiPoint Server 2012 computer will be able to see and use the printer.
|
Enable access over a wireless LAN in Windows MultiPoint Server 2012
If you want users to be able to access your Windows MultiPoint Server 2012 system over a wireless local area network (LAN), you must install and enable the Wireless LAN Service. Wireless network adapters are disabled by default in MultiPoint Server. For information about installing and enabling the Wireless LAN Service, see Wireless LAN Service Overview (http://technet.microsoft.com/library/hh994698.aspx).
This optional configuration in Windows MultiPoint Server 2012 Premium is primarily intended for situations where an essential application requires its own instance of a client operating system for each user. Examples include applications that cannot be installed on Windows Server and applications that will not run multiple instances on the same host computer.
Note
These Virtual Desktops, also known as VDI, are much more resource intensive than the default MultiPoint Server desktop sessions, so we recommend that you use default MultiPoint Server sessions when possible.
Prerequisites
To prepare to create station virtual desktops, ensure that your MultiPoint Server system meets the following requirements:
Operating system requirements – The Windows MultiPoint Server 2012 Premium operating system is required.
Hardware requirements for the MultiPoint Server computer - Windows MultiPoint Server 2012 is installed on a computer with the following minimum hardware.
Hardware
|
Requirements
|
CPU (multimedia)
|
1 core or thread per virtual machine
|
Solid State Drive (SSD)
|
Capacity >= 20GB per station + 40GB for the MultiPoint Server host operating system
Random Read/Write IOPS >= 3K per station
|
RAM
|
2GB per station + 2GB for the Windows MultiPoint Server host operating system
|
Graphics
|
DX11
|
BIOS
|
BIOS CPU setting configured to enable virtualization – Second Level Address Translation (SLAT)
|
Stations - Set up the stations for your MultiPoint Server system. For more information, see Attach additional stations to your Windows MultiPoint Server 2012 computer.
Domain - In a domain environment, the Windows MultiPoint Server computer has been added to the domain, and a domain user has been added to the local Administrators group on the MultiPoint Server host operating system.
Procedures
Use the following procedures to:
Create a template for virtual desktops
Create virtual machine desktops from the template
Copy an existing virtual desktop template
Create a template for virtual desktops
Before you can create a template for your virtual desktops, you must enable the Virtual Desktop feature in MultiPoint Server.
To enable the Virtual Desktop feature
1. Log on to the MultiPoint Server host operating system with a local administrator account or, in a domain, with a domain account that is a member of the local Administrators group.
2. From the Start screen, open MultiPoint Manager.
3. Click the Virtual Desktops tab, click Enable virtual desktops, and then click OK, and wait for the system to restart.
|
Your next step is to create a Virtual Desktop template. You are literally creating a virtual hard disk (VHD) file that you can use as a template to create station virtual desktops for MultiPoint Manager. You can either use the physical installation media for Windows or an .ISO image file to as source for the template. You can also use a .VHD of the Windows installation. Note that to use a physical installation disc, you must insert the disc before you start the wizard.
To create a Virtual Desktop template
1. Log on to the MultiPoint Server host operating system with a local Administrator account or, in domain, a domain account that is a member of the local Administrators group.
2. From the Start screen, open MultiPoint Manager.
3. Click the Virtual Desktops tab.
4. Insert a Windows 8 or Windows 7 Enterprise DVD in the DVD drive.
-Or-
Copy a Windows 8 or Windows 7 Enterprise .iso file to the local SSD.
5. On the Virtual Desktops tab, click Create virtual desktop template.
6. If you’re installing from a DVD, the dialog box automatically finds the Windows 8 or Windows 7 Enterprise .wim file on the DVD. If you’re using an .iso image file that you copied to a drive, use Browse to find the .iso file.
7. In Prefix, enter a prefix to use to identify the template and the virtual desktops created with the template. The default prefix is the host computer name.
The prefix is used to name the template and the virtual desktop stations. The template will be <prefix>-t. The virtual desktop stations will be named <prefix>-n, where n is the station identifier.
8. Enter a username and password to use for the local Administrator account for the template. In a domain, enter the credentials for a domain account that will be added to the local Administrators group. This account can be used to log on to the template and all virtual desktop stations created from the template.
9. Click OK, and wait for template creation to complete.
10. The new template will be listed on the Virtual Desktops tab. The template will be turned off.
|
Your next step is to configure the template with the software and setting that you want on the virtual desktops. You must do this before you create any virtual desktops from the template.
To customize a virtual desktop template
1. Log on to the MultiPoint Server host operating system with a local administrator account or, in a domain, with a domain account in the local Administrators group.
2. From the Start screen, open MultiPoint Manager.
3. Click the Virtual Desktops tab.
4. Select the template that you want to customize, click Customize template, and then click OK.
Note
Only the templates that have not been used to create virtual desktop stations are available. If you want to update a template that is already in use, you must make a copy of the template by using the Import template task, described later, in Copy an existing virtual desktop template.
The template opens in a Hyper-V VM Connect window, and auto-logon is performed using the built-in Administrator account.
5. At this point you can install applications and software updates, change settings, and update the administrator profile. All changes made to the template’s built-in administrator profile will be copied to the default user profile in the virtual desktop stations that are created from the template.
If you are connecting your stations over a domain, we recommend that you create a local user account and add it to the local Administrators group during customization.
Note
If the system restarts while a template is being customized, auto-logon using the built-in Administrator account might fail after the system restarts. To get around this problem, manually log on using the local Administrator account that you created, change the password of the built-in Administrator account, log off, and then log back on using the built-in Administrator account and the new password. (You will need to delete the profile that was created when you logged on using the local Administrator account.)
6. After you finish configuring your system, double-click the CompleteCustomization shortcut on the administrator’s desktop to run Sysprep and then shut down the template. During customization, the Sysprep tool removes all unique system information to prepare the Windows installation to be imaged.
| Create virtual machine desktops from the template
With your virtual desktop template configured the way you want your desktops to be, you are ready to begin creating virtual desktops. A virtual desktop will be created for each station that is attached to the MultiPoint Server computer. The next time a user logs on to a station, they will see the virtual desktop instead of the session-based desktop that was displayed before.
Note
This procedure only works when MultiPoint Server is in station mode. If the system is in console mode, you can switch to station mode from MultiPoint Manager. If you are using default MultiPoint settings, you can also start station mode by restarting the computer. By default, the MultiPoint Server computer always starts in station mode
To create virtual desktops for your stations
1. Log on to the Windows MultiPoint Server 2012 host operating system from a remote station (for example, from a Windows computer by using Remote Desktop Connection) using a local administrator account or, in a domain, a domain account in the local Administrators group.
Note
Alternatively, you can log on to the host operating system using a local station. However, when you create a station virtual desktop, you will have to log off the station that you used to create the virtual desktop in order to connect the other station to the new virtual desktop.
2. From the Start screen, open MultiPoint Manager.
3. If the computer is in console mode, switch to station mode:
a. On the Home tab, click Switch to station mode.
b. When the computer restarts, log on as Administrator.
4. Click the Virtual Desktops tab.
5. Select the virtual desktop template that you want to use with the stations, click Create virtual desktop stations, and then click OK.
When the task completes, each local station will connect to a virtual machine-based virtual desktop.
|
Note
If a user account is logged on to any of the local stations, you will need to log out of the session to get the station to connect to one of the newly created station virtual desktops.
Copy an existing virtual desktop template
Use the following procedure to create a copy of an existing virtual desktop template that you can customize and use. This can be useful in the following situations:
To copy a master template from a network share onto a MultiPoint Server host computer so that virtual desktop stations can be created from the master template.
To create a copy of a template that is currently in use so that you can make additional customizations.
To import a virtual desktop template
1. Log on to the MultiPiont Server 2012 host operating system as an administrator.
2. From the Start screen, open MultiPoint Manager.
3. Click the Virtual Desktops tab.
4. Click Import virtual desktop template, and use Browse to select the .vhd file (template) that you want to import. When you import a template, a copy is made of the original .vhd. By default, MultiPoint Server stores .vhd files in the C:\Users\Public\Documents\Hyper-V\Virtual hard disks\ folder.
5. Enter a prefix for the new template, and then click OK.
6. If you are making further customizations to a local template, you might change the prefix name by incrementing a version number at the end of the prefix. Or, if you are importing a master template, you might want to add the version of the master template to the end of the default prefix name.
7. When the task completes, you can customize the template or use it as it is to create stations.
|
|
