|
Requirements for a split screen station
|
| bet | 14/18 | | Sana | 26.12.2019 | | Hajmi | 295,45 Kb. | | #5203 |
To create a split-screen station, the monitor and station must meet these requirements:
The monitor must have a resolution of 1024x768 or higher.
If you are using a USB-over-Ethernet zero client, check with your hardware vendor to find out whether split-screen stations are supported. Many USB-over-Ethernet zero client devices have limitations that prevent their configuration as split-screen stations.
Use the following procedures to add a second hub for a split-screen station and then split the station in Windows MultiPoint Server 2012. The final procedure explains how to return a split-screen station to a single station.
 Note
When you split a station, the active session on the station is suspended. The user must log on to the station again to resume work after the split occurs.
 To add a second hub with keyboard and mouse
1. Connect a USB hub to an open USB port on the computer, as shown in the following illustration.
2. Connect a keyboard and mouse to the USB hub.
3. Connect any additional peripherals, such as headphones to the USB hub.
4. If you are using an externally powered hub, connect the power cable of the hub to a power outlet.
|
1. In the MultiPoint Manager, click the Stations tab.
2. Under Station, click the name of the station you want to split.
3. Under Selected Item Tasks, click Split station.
The original screen moves to the left half of the monitor, and a new station’s screen is created on the right half of the same monitor.
4. Create the new station by pressing the specified letter on the newly added keyboard as indicated when the Create a MultiPoint Server Station screen appears on the right half of the monitor.
After a station is split, one user can log on to the left station while another user logs on to the right station.
|
To return a split station to a single station
1. In the MultiPoint Manager, click the Stations tab.
2. Under Station, click the name of the station you want to unsplit.
3. Under Selected Item Tasks, click Unsplit station.
|
|
| |
