Configure Security for iSCSI Targets (optional)
-
No further steps are required to make the iSCSI targets ready to be accessed by the iSCSI initiators.
-
The management console provides the option to activate the other two network interfaces on the array. This was done by enabling and modifying the settings of the two network interfaces that were not activated in the earlier steps.
Each of the unassigned network interfaces, eth1 and eth2, were assigned an address and activated. All three network interfaces must use the same subnet mask and default gateway.
The EqualLogic MPIO DSM (Device Specific Module) must also be installed onto the iSCSI initiator hosts. The DSM is available on the Host Integration Tools CDROM or from EqualLogic’s website.
| 