|
A release dateBog'liq Fracsun ARES CS5 Install Manual, revA9.0 ARES LED Status
The ARES CS5 product is equipped with an external RGB LED that serves as a
visual indicator of its status. The LED can output different colors, each
representing a specific state or condition. Understanding the meaning of these
colors is important for monitoring and troubleshooting the product, this section
provides a clear and concise guide to interpreting the LED colors and their
associated statuses. Whether you're setting up the ARES product for the first
time or need to diagnose an issue, the table below will help you quickly identify
the current status of the product based on the color of the LED.
9.1
Initial setup
The External RGB LED may remain off during the initial setup of the ARES
product until the internal battery is charged to a minimum operating voltage.
Adequate sunlight exposure is recommended to charge the battery.
9.2
LED color and status (Cellular-only mode)
Below is a table that describes the various LED colors, behaviors, and the associated status. This table applies to
ARES devices in Cellular mode only.
LED behavior - color
LED
Status
Time on
Blinking - Green
Trying to connect to cellular tower
10 sec - 5
min
Blinking / Slow pulsing - Aqua
Connect / connected to Fracsun cloud
5 – 10 sec
Blinking - Orange
Listening for Modbus polls from Wash
Extension / SCADA
3 sec
Solid - Orange
Successful Modbus poll from Wash
Extension / SCADA
1 sec
Slow pulsing - Green
Taking a measurement.
3 sec
Slow pulsing – White
Processing code.
varies
Off
Sleeping or Off. In the default mode, the
device will go to sleep for 2 minutes to save
battery power.
|
| |
