For setting up the firewall for the Automation and Security Engines the steps described in chapter 2.1 are sufficient.
2.4 Additional Settings of the Video Engine
a) General OPC-Server Services and Applications
The OPC-Server can be installed on the Login- or Remote-Server. The standard settings for the DCOM-communication are sufficient for the OPC-Server of the Video Engine, for example the LTC8x00-OPC-Server.
b) Special OPC-Server Services and Applications
The process ports for communications of the Divar OPC-Server of the Video Engine are opened dynamically. Thus it is not sufficient to allow communication through port areas in the Firewall. Instead the services executable (in this case the Divar OPC-Server) have to be added in the Windows Firewall. Therefore the following ´Programmes and Services´ have to be made additionally to the settings described in chapter 2:
Port settings (UDP):
For Windows XP:
Start Windows Firewall via “Start” – “Settings” – “Control Panel” – “Windows-Firewall”
Select tab „Exceptions“
For Windows 7, Windows Server 2008 R2:
Select “Advanced settings”, do the following for Inbound Rules
Add new Rule
Rule Type: Port (UDP)
For all Operating Systems:
Allow DCOM port 135 (UDP)
Allow port 1024 - 65535 (UDP/RTP) in case Video SDK systems are used
Allow port 1024 - 65535 (TCP/RTP) in case Video SDK systems are used
Allow UPnP-Framework (Ports: 2869 (TCP), 1900 (UDP)) in case Divar systems are used
RTSP 554 (TCP/UDP):
The usage of ports is variable, depending on how the cameras are configured and which types of cameras are used.
For connections to Bosch IP Cameras, Encoder and Decoder:
Control channel: TCP ports 80 and 1756
Network scan: UDP ports 1757 and 1758
Multicast detection: one selectable UDP port (default 1800)
Multicast video transmission:
For each ip camera / encoder audio or video stream, 1 selectable UDP port
Unicast UDP transmission: UDP ports dynamically assigned in the range from
1024 to 65000
For connection to DiBos and BRS via VideoSDK OPC-Server (using Web service):
TCP port 808
For display of Dibos 8.7 via Dibos ImageDecoder-OCX (using DCOM):
TCP Port 135 plus four TCP ports and four UDP ports dynamically assigned in the range from 1025 to 65535
Program settings (OPC Server and Configuration-Tools for the VIE):
For Windows XP:
Start Windows Firewall via “Start” – “Settings” – “Control Panel” – “Windows-Firewall”
Select tab “Exceptions” and add the following programs:
For Windows 7, Windows Windows Server 2008 R2:
Start the Windows Firewall via “Start” – “Control Panel” – “Windows-Firewall”
Select “Advanced settings”, do the following for Inbound Rules
Add new Rules
Rule Type: Program
Allow the following programs:
For all Operating Systems:
BVIPOpcConfig.exe [Install-path]\MgtS\Video Engine \BVIPOpcConfig
BVIPOPCServer.exe [Install-path]\MgtS\Connections\BVIP
VcsOpcConfig.exe [Install-path]\MgtS\Video Engine\VCSOpcConfig
VCSOPCServer.exe [Install-path]\MgtS\Connections\VCS)
DivarConfig.exe [Install-path]\MgtS\Video Engine\DivarOPCConfig
DivarOPCServer.exe [Install-path]\MgtS\Connections\DivarOPCServer
VideoSdkOPCConfig.exe [Install-path]\MgtS\Connections\VideoSdkOPCServer
VideoSdkOPCServer.exe [Install-path]\MgtS\Connections\VideoSdkOPCServer
| 