Title: hp Digital Projectors xp8010 and Standard Connectivity Module - firmware update
Version: M3.1 / SCM26.28 Feb 03, 2004
Description:
This firmware release is for the hp Digital projector xp8010 with the standard connectivity module installed. There are two firmware updates in this package. The first updates the projector mainframe to version 3.1. The second updates the standard connectivity module to version 26.28. Both packages are automatically installed together.
Purpose: Routine Release
Category: Firmware
Language(s):
Installation instructions: English
Firmware supports: English, French, Italian, German, Spanish, Japanese, Traditional Chinese, Simplified Chinese, Korean
Mainframe Fixes:
In firmware version 3.1
- Support for Advanced Connectivity Module
- Language translation corrections
- Issues regarding reboot/machine reset fixed
- better control using the IR remote
- better communication and synchronization between the embedded web server in the standard
connectivity module and the mainframe on screen display.
In firmware version 2.0
- Asian language support added (Japanese, Korean, Traditional Chinese, Simplified Chinese)
- Western language corrections for strings too long to fit on OSD
- OSD changes to improve usability
- Horizontal position feature added to OSD
- IR remote reception improved
- Keystone capability added to the EWS (Embedded Web Server)
- Enabling sources capability added to the EWS
- Improved, easier to use, upgrade functionality
- Machine reset improvements
Standard connectivity module Fixes:
In firmware version 3.1
- Better firmware update functions
- Support for FTP updates
- Better embedded web server support for source searching on mainframe
In firmware version 2.0
- issue where projector could never power up after being powered down via the EWS fixed
- Added support for Keystoning and enabling sources from EWS
- Improved reliability on upgrade for catastrophic failure
- Fix for switching OSD language via the OSD
Prerequisites:
xp8010 digital projector, network connectivity, internet browser
How To Use:
To install the firmware updates:
1.Connect your projector to the network and turn it on.
2.Get the IP address of the projector by pressing enter on the projector or remote control to open the on-screen menu. Record the IP address, shown as a series of numbers on the bottom of the menu. Press the back button to close the menu.
3.Press the power button on top of the projector to put it in standby mode.
4.If you have downloaded the firmware update file with a .DLD extension then go directly to step#5. If you downloaded the firmware update file with an .exe extension run this file and follow it's instructions to extract the .DLD data file.
5.On a networked computer, open an internet browser, enter the IP address of the projector in the URL bar, and press the Enter key.
6.Click the Management tab, and on the left side of the screen, select Firmware Upgrade.
7.Click Browse. Then, select the .DLD file.
8.Click the upgrade button to start the upgrade process. Follow the displayed instructions.
Do not interrupt the process until it finishes.
Copyright © 2003, 2004 Hewlett-Packard Development Company, L.P.
|