[Realtek RF MP Tool Guidelines ]
Table of Contents
1. Features.
2. Software Package.
3. Quick Start Guide.
----3.1 Build MP Driver module.
----3.2 Build Android
wireless tools
--------3.2.1 rtwpriv
for MP APK GUI Tool
(RtkWiFiTest_Package_For_Customer)
--------3.2.1 iwpriv tool
----3.3 Manual for RF MP Use Example. (Chinese translation):
---------3.3.1 [ Continuous Tx testing ]
(無間斷調制訊號發送測試 )
---------3.3.2 [ Continuous Packet Tx testing ] (不限封包數量調制訊號發送測
試 )
---------3.3.3 [ Count Packet Tx testing ]
(有限封包數量調制訊號發送測
試 )
---------3.3.4 [ Carrier suppression testing ]
(載波抑制發送測試 )
---------3.3.5 [ Single Tone Tx testing ]
(無調制訊號單頻載波發送測
試 )
---------3.3.6 [ Air Rx testing ]
(接收封包測試 )
---------3.3.7 [ Enable/Disable Tx Power Tracking ]
4. Phy Efuse Read/Write Use Example.
------4.1 efuse_get
------4.2 efuse_get
------4.3 Efuse's spec.
------4.4
BT Efuse Function
------4.5 How to use Efuse File.
5. Crystal Calibration
6. Read/Write Thermometer
7. Enter To BT Test Link Mode (For WLAN/BT Combo IC)
=============================================================
[1. Features]
=============================================================
The following steps demonstrate Realtek Wireless Adapter Mass
Production Linux Tool. This is
a simple install guide,
We use Linux utility “iwpriv” to get and set I/O control to WLAN driver.
Or use realtek proprietary tools “rtwpriv” for Android system.
=============================================================
