|
Command & Conquer(tm) Generals
|
| bet | 4/7 | | Sana | 30.01.2023 | | Hajmi | 78 Kb. | | #40109 |
Bog'liq Patch 1, Dars mavzusi Yorug’lik interferensiyasi va difraksiyasi. Difra, Afinanıń basqarıw principi, 1 slayd, Business 7-JLang, 2, Jild-obloshka, Extracts, Anorboyeva Munisa, material gips test, Iqtisodiyot nazariyasi KURS ISHI usl. korsatma, 6BkuIZNI0tNGu0jFZjrK4kyXfsfqOjBasbAQMcKu (1), ishga qabul qilsh, topref.ru-113581.ru.uz1.2. Wireless SMC Routers:
Below, you will find instructions on how to open the ports of an SMC wireless router. Special thanks to forum regular HautKarl for the following information.
NOTE: This configuration is only for those experiencing connection problems setting up a game Online in Command & Conquer Generals behind a SMC Wireless Router/Firewall, although other SMC firewalls might work with similar setups.
These instructions show how to setup your SMC Wireless Router to open certain ports in the firewall when Generals tries to create or connect to an Online game.
1. Go to the configuration program for your router. To do that, open MS Internet Explorer and in the address box type http://192.168.2.1 (this is the default IP address for the SMC Wireless router; if you changed this address, then you should type the address that you entered the first time that you configured your router). You’ll be prompted for your login and password. If you have never changed your password, then use the default one. Look for it in the SMC instruction manual.
2. Now you should be at the main menu of the SMC setup program. Click in the menu named NAT, then click in the submenu named Special Applications.
3. Now you have to set up one rule per computer connected to the router that will be used to play Generals.
a) Add a triggering port per computer. The Trigger Port specifies which port is used to initiate the connection. It is important not to use a standard port. As you can see below we setup rules for 2 computers and we used port 29900 for the first computer and 29910 for the second computer. In the Trigger Type option select UDP as this is the protocol used by Generals
b) In Incoming Port Range we have to specify the ports that the router will enable whenever the computer establishes a connection through the Trigger Port. Here you will set up a range of ports. SMC routers seem to work correctly if you provide a range with 10 ports, however other firewalls might need wider ranges. Once again, do not use any standard ports or a range that might include a standard port. You have defined a range of 10 ports per connection between 27900 and 27921. In the Public Type option, select UDP, as this is the protocol used by Generals.
c) Repeat this process adding a new rule per computer that will be used to play Generals online. You have setup forwarding rules for just two computers.
d) Once you are done, click the Apply button.
4. Now you have set up each of the computers so each one uses a specific port in your firewall to initiate the connections.
a) Go to the first computer that you are going to use to play C&C Generals and open the My Documents folder. Then go to the folder named Command and Conquer Generals Data and double click in the file named Options.ini
b) Look in the file for the lines:
|
| |
