|
Cont.. Register transfer and micro operation
|
| bet | 7/10 | | Sana | 18.05.2024 | | Hajmi | 24 Kb. | | #242804 |
Bog'liq Protsessorda buyruqlarni bajarilish davri-fayllar.orgCont.. In symbolic notation, it is used to describe the micro-operations transfer among registers. It is a kind of intermediate representation (IR) that is very close to assembly language, such as that which is used in a compiler. The term “Register Transfer” can perform micro-operations and transfer the result of operation to the same or other register. Micro-operations : The operation executed on the data store in registers are called micro-operations. They are detailed low-level instructions used in some designs to implement complex machine instructions. Register Transfer : The information transformed from one register to another register is represented in symbolic form by replacement operator is called Register Transfer. Replacement Operator : In the statement, R2 <- R1, <- acts as a replacement operator. This statement defines the transfer of content of register R1 into register R2. Cont.. There are various methods of RTL – 1 General way of representing a register is by the name of the register inclosed in a rectangular box as shown in (a). 2 Register is numbered in a sequence of 0 to (n-1) as shown in (b). 3 The numbering of bits in a register can be marked on the top of the box as shown in (c). 4. A 16-bit register PC is divided into 2 parts- Bits (0 to 7) are assigned with lower byte of 16-bit address and bits (8 to 15) are assigned with higher bytes of 16-bit address as shown in (d) Cont.. Cont.. It indicates that if P=1, then the content of R1 is transferred to R2. It is a unidirectional operation. Simultaneous Operations – If 2 or more operations are to occur simultaneously then they are separated with comma (,). If the control function P=1, then load the content of R1 into R2 and at the same clock load the content of R2 into R1. Bus design |
| |
