• Device Manager \ Devices by connection \ ports (COM LPT)
  • “Prolific USB-to- serial Comm port(COM3)”
  • " Port Settings "
  • If the Modem could not link with the new port, and run smoothly when changed the port, please kindly unload Modem, and re-install it.
  • Setting Up the RS232 Serial Device
  • Uninstalling the Driver Program
  • Usb-serial Adapter User Guide Product Features




    Download 261.5 Kb.
    bet2/2
    Sana24.06.2020
    Hajmi261.5 Kb.
    #10606
    1   2
    setcom.exesofeware

    7. Under Windows Me 、 Windows 2000 、 Windows XP, please kindly following the steps as below. :



        (1) Please click on the Device Manager\ Devices by connection \ ports (COM & LPT). ( images 1)

             

             ( images 1)



            (2) Doubly click on “Prolific USB-to- serial Comm port(COM3)” .And it could go to ‘ properties'. (images 2)

             

            (images 2)



            (3) Please choose "Port Settings ", and then click on "Advanced". Please kindly choose the needed com, and click on" ok”. (images 3)

             

             (images 3)

    Notice:

    If the Modem could not link with the new port, and run smoothly when changed the port, please kindly unload Modem, and re-install it.

    When Changing the port, the peripheral equipment could not shift to the new port, and run smoothly. Under this situation, please kindly unload the equipment and install again.
    Setting Up the RS232 Serial Device

    Follow the steps below to connect your RS232 Serial Device (ie: Modem) to the USB port of your PC:




    1. Turn off your Modem. Plug the DB 9 connector of the USB-Serial cable into your Modem. Turn on the Modem afterwards.

    2. Turn on your computer and plug in the USB connector of the USB-Serial cable into the USB port.

    3. If you have already installed a Modem device before, click Start, Settings, Modems. Open Modems Properties, select the Modem, click Properties. In General tab, please change the Port value to USB to Serial Port (COM3).

    4. After finishing these processes, you can use USB to Serial Bridge Cable to connect RS232 Serial 56K FAX Modem and execute the Dial-up fuction to connect Internet, and send the FAX with the FAX software(ie: Microsoft FAX) properly.




    Uninstalling the Driver Program

    If you want to remove the USB-Serial cable driver program, you can uninstall it by following the steps below:



    1. Unplug the USB-Serial cable from your PC.

    2. Run the DRemover98_2K.exe program from the software CD-ROM, then reboot the PC.











    Download 261.5 Kb.
    1   2




    Download 261.5 Kb.

    Bosh sahifa
    Aloqalar

        Bosh sahifa



    Usb-serial Adapter User Guide Product Features

    Download 261.5 Kb.