© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page
1
of
15
Packet Tracer
– Create a Simple Network Using Packet Tracer
Topology
Addressing Table
Device
Interface
IP Address
Subnet Mask
Default Gateway
PC
Ethernet0 DHCP
192.168.0.1
Wireless Router LAN
192.168.0.1
255.255.255.0
Wireless
Router Internet
DHCP
Cisco.com
Server
Ethernet0 208.67.220.220
255.255.255.0
Laptop
Wireless0 DHCP
Packet Tracer
– Create a Simple Network
© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page
2
of
15
Objectives
Part 1: Build a Simple Network in the Logical Topology Workspace
Part 2: Configure the Network Devices
Part 3: Test Connectivity between Network Devices
Part 4: Save the File and Close Packet Tracer
Background / Scenario
In this activity you will build a simple network in Packet Tracer from scratch and then save
the network as a
Packet Tracer Activity File (.pkt).
Part 1: Build a Simple Network in the Logical Topology Workspace
Step 1: Launch Packet Tracer.
a. Launch Packet Tracer on your PC or
laptop computer
Double
click on the
Packet Tracer
icon on your desktop or navigate to the
directory that contains the
Packet Tracer executable file and launch Packet Tracer. Packet Tracer should
open with a blank default
Logical
topology workspace as shown in the figure.
