|
Create a Simple Network Using Packet Tracer Topology Addressing Table Device Interface ip address Subnet Mask Default GatewayBog'liq 2.1.1.5 Packet Tracer - Create a Simple Network Using Packet TracerPacket Tracer
– Create a Simple Network
© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page
4
of
15
The wireless router will need a copper straight-through cable to connect to the cable modem. Select the
copper straight-through cable in the device-selection box and attach it to the Internet interface of the
wireless router and the Port 1 interface of the cable modem.
The cable modem will need a coaxial cable to connect to the Internet cloud. Select the coaxial cable in
the device-selection box and attach it to the Port 0 interface of the cable modem and the coaxial interface
of the Internet cloud.
The Interne cloud will need copper straight-through cable to connect to the Cisco.com server. Select the
copper straight-through cable in the device-selection box and attach it to the Ethernet interface of the
Internet cloud and the FastEthernet0 interface of the Cisco.com server.
Part 2: Configure the Network Devices
Step 1: Configure the wireless router
a. Create the wireless network on the wireless router
Click on the
Wireless Router
icon on the Packet Tracer
Logical
workspace to open the device
configuration window.
In the wireless router configuration window, click on the
GUI
tab to view configuration options for the
wireless router.
Next, click on the
Wireless
tab in the GUI to view the wireless settings. The only setting that needs to be
changed from the defaults is the
Network Name (SSID)
. Here, type the name “HomeNetwork” as shown
in the figure.
Configure the Internet connection on the wireless router
Click on the
Setup
tab in the wireless router GUI.
|
|
Bosh sahifa
Aloqalar
Bosh sahifa
Create a Simple Network Using Packet Tracer Topology Addressing Table Device Interface ip address Subnet Mask Default Gateway
|
